Проверенная сеть поставщиков
Cable accessories sourced from qualified manufacturers with full IEC documentation — the same supply chain used for BOMFLEX project deliveries.
Комплект кабельного соединения & Cable Termination Kit Supplier
Холодная усадка, термоусадка, and straight-through cable joint kits for MV and LV power cable systems — IEC 60840 и МЭК 60502 compatible, available as standalone supply or consolidated with cable orders through BOMFLEX.
МВ & LV Compatible
Cold Shrink & Heat Shrink
МЭК 60502 / 60840
Underground Cable Joints
Substation Terminations
Overhead Line Connections
Industrial Installations
Проекты возобновляемой энергетики
MV and LV Cable Joint Kits — Cold Shrink, Heat Shrink and Straight-Through
Холодная усадка, термоусадка, and straight-through joint kits across MV and LV voltage ranges. Compatible with XLPE and PVC insulated cables from major manufacturers.
Product entries for this category are being prepared. Send your specification for direct factory support.
Технические характеристики
| Product Type | Joint Type | Уровень напряжения | Cable Insulation | Диапазон проводников (мм²) | Стандартный |
|---|---|---|---|---|---|
| MV Cold Shrink Joint Kit | Straight-through / Branch | 3.6/6kV – 26/35kV | СПЭ / ЭПР | 25 – 630 | МЭК 60502-4 |
| MV Heat Shrink Joint Kit | Straight-through / Branch | 3.6/6kV – 26/35kV | СПЭ / ЭПР | 25 – 630 | МЭК 60502-4 |
| MV Cold Shrink Termination Kit | Открытый / Крытый | 3.6/6kV – 26/35kV | СПЭ / ЭПР | 25 – 630 | МЭК 60502-4 |
| MV Heat Shrink Termination Kit | Открытый / Крытый | 3.6/6kV – 26/35kV | СПЭ / ЭПР | 25 – 630 | МЭК 60502-4 |
| LV Straight-through Joint Kit | Straight-through | Up to 1kV | СПЭ / ПВХ | 16 – 240 | МЭК 60502-1 |
| LV Heat Shrink Termination Kit | Открытый / Крытый | Up to 1kV | СПЭ / ПВХ | 16 – 240 | МЭК 60502-1 |
Joint kits are available for single-core and three-core cable configurations. Specify voltage grade, cable insulation type, поперечное сечение проводника, and number of cores when requesting a quote.
Cable Accessories and Cables — Supplied Together in One Shipment
Power infrastructure projects require cable joint kits, termination kits, and cable accessories to arrive on site at the same time as the cables — coordinating multiple suppliers for the same delivery schedule creates significant procurement risk.
LX Cable’s BOMFLEX service consolidates your complete project accessory and cable requirement:
For EPC contractors and utility procurement teams, BOMFLEX eliminates the coordination cost of sourcing cable accessories and cables from different suppliers.
- MV cable joint kits and termination kits matched to your cable specification
- MV and LV power cables across voltage grades and conductor cross-sections
- Ограничители перенапряжения, изоляторы, and overhead line hardware
- Воздушные проводники (АКСР / АААК / ААС) и оптоволоконные кабели
- Consolidated into a single factory-verified shipment with matched documentation
Why Project Teams Source Accessories from LX Cable
25+ Многолетний опыт
Supporting power infrastructure projects since the 1990s, with deep knowledge of accessory-to-cable compatibility across voltage grades and installation types.
Документация, соответствующая IEC
Joint kits and termination kits supplied with full test reports, installation instructions, and compliance certificates ready for project handover.
130+ Страны доставки
Proven cross-border logistics for accessories and cables — consolidated shipments to over 130 страны мира.
Часто задаваемые вопросы
Cold shrink joint kits use pre-expanded silicone rubber sleeves that contract around the cable when a core support is removed — no heat source is required, which makes them suitable for environments where open flame or heat guns are restricted, such as tunnels, oil platforms, or confined spaces. Heat shrink joint kits use thermoplastic sleeves applied with a heat gun; they are widely available and lower in cost but require controlled heating conditions during installation. Both types are available for MV XLPE cables from 3.6kV to 35kV.
Cable joint kits must be compatible with the cable’s insulation material (XLPE or EPR), поперечное сечение проводника, класс напряжения, and number of cores. They are not cable-manufacturer-specific, but the installation parameters — such as insulation diameter and screen/shield type — must match the kit specification. When ordering joint kits alongside cables from LX Cable, compatibility is verified and documented as part of the BOMFLEX supply process.
MV cable joint and termination kits are available for voltage grades from 3.6/6kV up to 26/35kV, covering the most common medium voltage distribution ranges including 6kV, 10кВ, 15кВ, 20кВ, and 33kV systems. Specify the system voltage and cable construction when requesting a quote.
Да. Через сервис БОМФЛЕКС, LX Cable can supply MV or LV power cables together with matched cable joint kits, termination kits, ограничители перенапряжения, and other accessories in a single consolidated shipment. This eliminates the need to place separate orders and coordinate delivery timing across suppliers.
Each kit is supplied with a product datasheet, installation instructions, and IEC test report. Upon request, compliance certificates (CE, РоХС) and material safety data sheets can be provided for project handover documentation.
Укажите следующие параметры: cable voltage grade (кВ), cable insulation type (СПЭ / ЭПР / ПВХ), поперечное сечение проводника (мм²), количество ядер (1C or 3C), and joint application (straight-through, branch, or termination — indoor or outdoor). Upload your cable datasheet or project specification sheet via the inquiry form and our technical team will confirm kit compatibility and availability.
